What it approves
Installation of ACAS II System with Dual Mode S Transponders, ELS compliant and EHS capable,
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part 23 of the Federal Aviation Regulations.
Original Product -- Type Certificate Number: A1WI
Make: Cessna Aircraft Company
Model: Cessna 525, S/N 0001 through 0359
1. Installation of ACAS II System with Dual Mode S Transponders, ELS compliant and EHS capable, in accordance with RUAG Master Document List, document number 118A-MDL, revision A, dated May 16, 2012.
2. The following RUAG Aerospace documents are required with this installation:
a) The aircraft must be maintained in accordance with Continued Airworthiness Plan, document number 118A-CAWP, revision D, dated May 16, 2012.
b) EASA approved Airplane Flight Manual Supplement, document number 118A-AFMS, revision N/C dated June 20, 2005, is required with this installation.
1. The installer must determine whether this design change is compatible with previously approved modifications.
2. If the holder agrees to permit another person to use the certificate to alter the product, the holder must give the other person written evidence of that permission.
RUAG Aerospace Services GmbH Postfach 1253 Sonderflugplatz Oberpfaffenhofen 82231 Wessling Germany Date reissued :
(Signature) Gaetano Sciortino Acting Manager New York Aircraft Certification Office
(Title) Date of application: Feb 3, 2012
Date of issuance: June 4, 2012
FAA Form 8110-2-1(10-69) Page 2 of 2
Number SA03106NY Date of Issuance: June 4, 2012
Limitations and Conditions: (Continued)
Certification Basis
Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Cessna Aircraft Company model 525, S/N 0001 through 0359 is as follows:
a. The type certification basis for the Cessna Aircraft Company model 525, S/N 0001 through 0359 is shown on TCDS A1WI for parts not changed or not affected by the change.
b. The type certification basis for the Cessna Aircraft Company model 525, S/N 0001 through 0359 is shown on TCDS A1WI for parts changed or affected by the change.
-------- END--------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cessna Aircraft Company | 525 | A1WI |