What it approves
Installation of Reabe Aircraft Improvement modified ram air inlet system 7-1-0-000
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 23 of the Federal Aviation R egulations. (See Type Certificate Data Sheet No. A17SW for complete certification basis)
Original Product --Type Certificate N umber :
Installation of Reabe Aircraft Improvement modified ram air inlet system 7-1-0-000 in according with Installation Instructions 7-11, revision C, dated January 8, 2014, or later FAA approved revision.
1. Compatibility of this design change with previously approved modifications must be determined by the installer.
2. Reabe Instructions for Continued Airworthiness, ICA-1 revision A, dated November 16, 2012 or later FAA accepted revision is required with this installation
3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certificate and the su pporting data which is the basis for approval shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.
Reabe Aircraft Improvement Inc.
W13105 Alp Ave.
Plainfield, WI 54966 A17SW M ake : Air Tractor M odel : AT-502, AT-502A, AT-502B
B y direction of the A dministrator
Original Signed By:
Timothy Smyth
(Signature) Timothy Smyth Propulsion and Program Management Branch Chicago Aircraft Certification Office
(Title)
Date of application: May 6, 2012
Date of issuance : January 21, 2014
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.