STC SA03333NY

FAA Form 8110-2 (5/14) Page 1 of 3

Number: SA03333NY

Parts 23 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: 2A3 M ake: Mooney Aviation Company Model: M20B, M20C, M20D, M20E, M20F, M20G, M20J, M20K

Installation of a replacement thermoplastic cabin sidewalls with new thermoplastic sidewalls, in accordance with Triumph Interiors, LLC. Master Drawing List MDL-T-1530501, Revision B, dated July 24, 2013.

1. Triumph Interiors, LLC. Instructions for Continued Airworthiness, (ICA), ICA-1530501, Rev. B Dated October 10, 2010 or later FAA accepted revision is required for this modification.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Certification Basis:

Date of Application: November 20, 2009 Date Reissued: December 23, 2016; November 19, 2018; August 17, 2020 Date of Issuance: September 26, 2013 Date Amended:

Signature

Title Monica L. Nemecek, Manager Airframe & Administrative Section Chicago ACO Branch

Wisconsin Aviation, Inc.

1741 River Drive Watertown, WI 53094

FAA Form 8110-2 (5/14) Page 3 of 3

Transfer the ownership of Supplemental Type Certificate Number: SA03333NY

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA03333NY

FAA Form 8110-2 (5/14) Page 3 of 3

Date of Issuance: September 26, 2019 Date of Reissuance: August 17, 2020

Certification Basis (Continued):

Based on 14 CFR §§21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Mooney Models M20B, M20C, M20D, M20E, M20F, M20G, M20J, M20K series Installation of a replacement thermoplastic cabin sidewalls with new thermoplastic sidewalls is as follows:

a. The type certification basis for Mooney Models M20B, M20C, M20D, M20E, M20F, M20G, M20J, M20K series airplanes is shown on TCDS 2A3 for parts not changed or not affected by the change.

b. The type certification basis for Mooney Models M20B, M20C, M20D, M20E, M20F, M20G, M20J, M20K series airplanes is shown on TCDS 2A3 for parts changed or affected by the change.

-END-