STC SA03342NY

This certificate issued to

Part 3 of the Civil Aviation R egulations.

Original Product – Type Certificat e N umber:

Description of Type Design Chang e:

Installation of the replacement to the OEM landing gear door hinge bushings, in accordance with Marsh Brothers Aviation Inc.

Installation Instructions II0002, Revision Original, dated November 1, 2012 or later Transport Canada approved revision.

For Instructions for Continued Airworthiness refer to Marsh Brothers Aviation Inc. Maintenance Manual Supplement, MMS0002, Revision Original, dated November 1, 2012, or later Transport Canada accepted revision.

1. Mandatory replacement time and/or inspection intervals, defined in the “Airworthiness Limitation” section of Marsh Brothers Aviation Inc. Maintenance Manual Supplement, MMS0002, Revision Original, dated November 1, 2012, or later Transport Canada accepted revision, are to be complied with.

Marsh Brothers Aviation Inc.

3225 Mainway Burlington, Ontario Canada L7M 1A6 3A16 Beechcraft Corporation M ake:

M odel:

56TC, 58, 58A, 95, 95-55, 95-A55, 95- B55, 95-B55A, 95-B55B, 95-C55, 95- C55A, A56TC, B95, B95A, D55, D55A, D95A, E55, E55A, E95, G58

Date of application : July 19, 2013

Date of issuance : November 14, 2013 Date reissued:

B y direction of the A dministrator

(Signature) Gaetano Sciortino Manager New York Aircraft Certification Office

(Title)

FAA Form 8110-2-1(10-69) Page 3 of 3

N umber SA03342NY

Date of Issuance: November 14, 2013

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

..……………END………………..