STC SA03831NY

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SA03831NY

RUAG SCHWEIZ AG, RUAG AVIATION Seetalstrasse 175 P.O. Box 301 6032 Emmen - Switzerland Federal Aviation Regulations.

1. Installation of Pax Seat sliding mechanism in accordance with RUAG Schweiz AG Master Data List, MDL-8001538, Revision C, dated July 29, 2016 or later EASA approved revisions.

2. Aircraft is to be maintained in accordance with RUAG Schweiz AG Instructions for Continued Airworthiness, ICA-8001540, Revision F, dated July 12, 2016, or later EASA accepted revisions.

3. Aircraft is to be operated in accordance with RUAG Schweiz AG Aircraft Flight Manual Supplement, FMS-608835, Revision D, dated July 13, 2016, or later EASA approved revisions.

1. This change is only approved for the Pilatus PC-12 with Oxygen Mask installed in the side ledge.

2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

3. The installer must determine whether this design change is compatible with previously approved modifications.

Anthony E. Gallo Acting Manager New York Aircraft Certification Office Pilatus Aircraft Ltd.

PC-12 October 21, 2016 November 15, 2016 IMPORT A78EU 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA03831NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date of Issuance: November 15, 2016

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA Order 8110.48, the certification basis for the Pilatus PC-12 is as follows:

a. The type certification basis for the Pilatus PC-12 is shown on TCDS A78EU for parts not changed or not affected by the change.

b. The type certification basis for the Pilatus PC-12 is shown on TCDS A78EU for parts changed or affected by the change.

----------END---------- SA03831NY