STC SA03930NY

1211 Gravenhurst Parkway Gravenhurst, Ontario Canada P1P 1R1 Part 3/23 the Civil Air / Title 14, Code of Federal Regulations *See attached FAA Approved Model List (AML) No. SA03930NY for a list of approved models and applicable airworthiness regulations.

*See attached FAA AML No. SA03930NY *See attached FAA AML No. SA03930NY

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This STC is applicable to all serial numbers for the Make and Models as shown on the attached FAA AML No.

SA03930NY.

(See continuation sheet 3) 03/07/2017 02/17/2026 07/11/2017 02/17/2026 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

1. Installation of King Air Belly Payload Mount must be in accordance with the Master Drawing List as shown on the attached FAA AML No. SA03930NY.

2. Maintenance must be in accordance with the applicable Instructions for Continued Airworthiness as shown on the attached FAA AML No. SA03930NY.

4. This approval is limited to only the installation of King Air Belly Payload Mount structural provisions, and does not include installation of electrical provisions. A subsequent design approval is required to install electrical provisions for the King Air Belly Payload Mount.

----------END---------- 3 3