STC SA04063NY

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SA04063NY S4A SOLUTIONS FOR AVIATION, S.L Calle Corazon De Maria 48B Planta 4, Puerta B 28002 Madrid, Spain Federal Aviation Regulations.

1. Installation of the mission system Leica City Mapper (Sensor Unit and its respective server, cockpit display and operator stand and display) in accordance with S4A Solutions for Aviation, S.L. Service Bulletin P2006T10-SB001, Issue 6, dated February 19, 2018 and Modification Description P2006T10-DES01, Issue 3, dated December 17, 2017 or later EASA approved revisions.

2. Aircraft is to be maintained in accordance with S4A Solutions for Aviation, S.L. Maintenance Manual Supplement P2006T10- HDK02, Issue 4, dated February 19, 2018 or later EASA accepted revisions.

3. Aircraft is to be operated in accordance with S4A Solutions for Aviation, S.L. Aircraft Flight Manual Supplement P2006T10- HDK01, Issue 6, dated February 22, 2018 or later EASA approved revisions.

1. The following OEM modification must be implemented in the aircraft prior to carry out this design change.

a) MOD2006/204 Installation of converter box

b) MOD2006/307 Enlarged hatch for Leica installation

c) MOD 2006/310 Removal of baggage compartment windows

d) MOD2006/309 Alternative combination of seats

e) MOD2006/308 Landing gear hydraulic system alternative path on hatch area (See Limitations and Conditions Continued on Page 3 of 3) Raymond H. Reinhardt Acting Manager New York ACO Branch Costruzioni Aeronautiche Tecnam srl P2006T February 1, 2018 March 2, 2018 IMPORT A62CE 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA04063NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date of Issuance: March 2, 2018

f) MOD2006/306 Left cabin skin flat stringer

g) MOD2006/319 Leica GPS dedicated antenna

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA Order 8110.48, the certification basis for the Costruzioni Aeronautiche Tecnam srl. P2006T is as follows:

a. The type certification basis for the Costruzioni Aeronautiche Tecnam srl. P2006T is shown in 14 CFR, Part 23 and amendments listed in TCDS A62CE for parts not changed or not affected by the change.

b. The type certification basis for the Costruzioni Aeronautiche Tecnam srl. P2006T is shown in 14 CFR, Part 23 and amendments listed in TCDS A62CE for parts changed or affected by the change.

---------------------END-------------------- SA04063NY