STC SA04154NY

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SA04154NY Sealand Aviation Ltd.

17-2000 Jubilee Parkway Campbell River, British Columbia Canada V9H 1T5 Civil Air Regulations.

1. Installation of the Replacement Hammock Seat Support must be in accordance with Transport Canada Civil Aviation (TCCA) approved Sealand Aviation Ltd., Installation Instructions SAL1623-INS, Revision NI, dated February 1, 2018 or later TCCA approved revision, and TCCA approved Sealand Aviation Ltd., Master Drawing List SAL1623-001, Revision NI, dated February 5, 2018 or later TCCA approved revision.

2. Maintenance of the Replacement Hammock Seat Support Installation must be in accordance with TCCA accepted Sealand Aviation Ltd., Instructions for Continued Airworthiness SAL1623-ICA, Revision NI, dated February 1, 2018, or later TCCA accepted revisions.

1. The installer must determine whether this design is compatible with other previously approved modifications.

2. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

Michael Linegang Acting Manager New York ACO Branch Viking Air Limited DHC-2 Mk.I, DHC-2 Mk.II, DHC-2 Mk.III May 19, 2018 July 27, 2018 IMPORT A-806 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA04154NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date of Issuance: July 27, 2018

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA Order 8110.48, the certification basis for the Viking Air Limited DHC-2 Mk.I, DHC-2 Mk.II, DHC-2 Mk.III is as follows:

a. The type certification basis as shown in CAR 3 and amendments listed in TCDS A-806 for parts not changed or not affected by the change.

b. The type certification basis as shown in CAR 3 and amendments listed in TCDS A-806 in addition to 14 CFR

23.1529 at amendment 23-8 for parts changed or affected by the change.

----------END---------- SA04154NY