STC SA04179NY

EDER AVIATIO Department of Transportation United States of America TOMINIS TRAND Supplemental Type Certificate Federal Aviation Administration Number: SA04179NY This certificate issued to: Aviation Repair Resources, Inc.

1209 Sturgeon Court Arlington, Texas 76001 Part _ 25 of the Federal Aviation Regulations.

Original Product - Type Certificate Number: Make: SAAB AB, Saab Aeronautics A52EU Model: SAAB 340B Description of Type Design Change:

Installation of the Special Mission Equipment Provisions in accordance with Aerospace Design & Compliance, LLC. (1) Master Data List SP34-MDL-0020, Rev A, dated 8/01/2019, or later FAA approved revision. (2) Instructions for Continued Airworthiness (ICA) 263-801, Rev A, dated 7/24/2019, or later FAA accepted revision. The ICA and its contents must be incorporated into the operator's maintenance program.

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3. Aircraft is limited to operation in Restricted Category for the aerial surveying.

Date of Application: July 14, 2018 Date Reissued: September 5, 2019 Date of Issuance: May 21, 2019 Date Amended: August 1, 2019 By Direction of the Administrator , Signature Kat din Anthony E. Gallo Manager New York ACO Branch

FAA Form 8110-2 (5/14) Page 1 of 3

FEDERAL AVIATION United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA04179NY Date Reissued: September 5, 2019 Certification Basis:

Based on 14 CFR 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the SAAB AB, Saab Aeronautics Model SAAB 340B is as follows:

(1) The type certification basis for the SAAB AB, Saab Aeronautics Model SAAB 340B airplanes is shown on TCDS ASZEU for parts not changed or not affected by the change.

(2) The certification basis for parts changed or affected by the change since the reference date of application July 14, 2018, is based upon part 25 as amended by 25-1 through 25-51, and Amendments 25-58, 25-59, 25-61, and 25-62 with the exception of those above amendment 25-62 listed below.

Regulations at later amendment than 25-62:

14 CFR §25.321(a)(b) amdt 25-86 14 CPR §25.561(a)(b)(c)(d) amdt 25-64 14 CFR §25.869(a)(1)(3)(4) amdt 25-113 14 CFR §25.899(a)(b) amdt 25-123 14 CFR §25.981 (a)(3) amdt 25-102 14 CFR §25.1351(a) amdt 25-72 14 CFR §25.1381(a) amdt 25-72

3) Compliance has been demonstrated to 14 CFR § 26.11(c) amdt 26-0 and 14 CFR §26.47(c) amdt 26-1.

-----END--

FAA Form 8110-2 (5/14) Page 3 of 3