STC SA04243AT

FA A FORM 8110-2(10-68) PAGE 1 of 3

Number SA04243AT This certificate issued to

Part 25 of the Federal Aviation Regulations.

Installation of AFT Lavatory Coat Hanger Support in accordance with Embraer Engineering and Technology Center Master Drawing List Report No. P300-008-002, Rev B, dated 10/13/2015, or later FAA approved revision.

1) This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated, unless it is determined by the installer that the interrelationship between this change and any other previously approved modifications will produce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

2) Instructions for Continued Airworthiness, EETC Document No. P300-008-003, Rev A, dated 10/12/2015, or later approved revision must be made available to the operator at the time of installation.

Embraer Engineering and Technology Center (EETC) - USA 1400 General Aviation Drive Melbourne, Florida 32935 A60CE Make: Embraer Model: EMB-505 Date reissued:

(Signature) Melvin D. Taylor Manager, Atlanta Aircraft Certification Office

(Title)

Date of application: April 3, 2015 Date of issuance: December 9, 2015

Transfer the ownership of Supplemental Type Certificate Number

to (Name of transferee)

(Address of transferee) (Number and Street)

(City, State, and ZIP code)

from (Name of grantor) (Print or type)

(Address of grantor) (Number and Street)

(City, State, and ZIP code)

Signature of grantor (In ink):

Number SA04243AT Date of Issuance: December 9, 2015 Date Reissued:

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Embraer Model EMB-505 is as follows:

a. The type certification basis is shown on TCDS A60CE for parts not changed or affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of application, April 3, 2015, is based upon FAR Part 23 as amended by amendment 23-57. Based on Order 8110.48, the certification basis for this modification was determined to be:

14 CFR Part 23 Regulations at the latest amendment 23-0 through 23-62:

None

14 CFR Part 23 Regulations at an intermediate amendment:

None

14 CFR Part 23 Regulations at the amendment level in TCDS A60CE (Amendment 23-0 through 23-57):

§§ 23.301 §§ 23.303 §§ 23.305 §§ 23.307 §§ 23.321 §§ 23.341 §§ 23.443 §§ 23.601 §§ 23.603 §§ 23.605 §§ 23.607 §§ 23.609 §§ 23.611 §§ 23.613 §§ 23.619 §§ 23.625 §§ 23.853 §§ 23.1447 §§ 23.1529 §§ 23.1541

-------------------------------------------- END ---------------------------------------------------