What it approves
Manufacturing and Installation of the Fuselage Attachment
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificate issued to:
IMPORT SA04658NY Aerotech Industries Inc.
2870 Spit Road; P.O. Box 727 Campbell River, British Columbia Canada V9W 6J3
Original Product A-815 Make:
Viking Air Limited DHC-3
1. Manufacturing and Installation of the Fuselage Attachment Fittings must be in accordance with Aerotech Industries, Inc. Master Drawing List AT-700-MDL, Rev. C, Transport Canada Civil Aviation (TCCA) approved August 13, 2021, or later TCCA approved revision.
2. Maintenance and Inspection must be in accordance with Aerotech Industries, Inc. Maintenance Manual Supplement AT-7-MMS accepted August 16, 2021, or later TCCA accepted revision.
1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
(Limitations and Conditions Continued on Page 3 of 3)
May 27, 2021 September 23, 2021 By Direction of the Administrator Signature:
Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service
IMPORT SA04658NY
SA04658NY To (Name and address of transferee):
IMPORT SA04658NY Date of Issuance: September 23, 2021
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. This STC is applicable to all serial numbers for this Make and Model.
----------END----------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Viking Air Limited | DHC-3 | A-815 |