STC SA04675NY

IMPORT SA04675NY Exploits Valley Air Services Ltd.

70 C.L. Dobbin Drive Gander, Newfoundland and Labrador Canada A1V 1W7 Part 23 Title 14 Code of Federal Regulations A24CE Textron Aviation Inc.

1900D

1. Installation of Cargo Conversion must be in accordance with IMP Aerospace Engineering Data List Part A, MISC-6533/20001, Issue 1, Transport Canada Civil Aviation (TCCA) approved September 15, 2020, or later TCCA approved revision.

2. Operation must be in accordance with IMP Aerospace Engineering Flight Manual Supplement CIV-R024, Revision C, TCCA approved September 21, 2020, or later TCCA approved revision.

(Description of Type Design Change Continued on Page 3 of 3)

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Limitations and Conditions Continued on Page 3 of 3) September 16, 2021 November 1, 2021

Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT SA04675NY SA04675NY 3

IMPORT SA04675NY Date of Issuance: November 1, 2021

Description of Type Design Change (continued):

3. Maintenance must be done in accordance with IMP Aerospace Engineering Instructions for Continued Airworthiness Report CIV-R023, Revision D, TCCA accepted September 21, 2020, or later TCCA accepted revision.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This STC is applicable to all serial numbers for this Make and Model.

4. Barrier nets are not to be installed at FS220.75 and FS250.75 unless an Emergency Exit is installed on the right-hand side of the fuselage forward of FS213.25.

5. Compliance with the Airworthiness Limitation contained in CIV-R023, Revision D, TCCA accepted September 21, 2020, is mandatory.

----------END---------- 3 3