STC SA04677CH

SA04677CH Reabe Design LLC 2552 Coreland Ct.

De Pere, WI 54115 Part 23 the Code of Federal Regulations See AML See AML See AML Installation of a Powered Hopper Lid and Auger System in accordance with Reabe Design LLC Data List per AML SA04677CH.

The aircraft must be maintained in accordance with Instructions for Continued Airworthiness per AML SA04677CH.

(See Continuation sheet 3 of 3 for continued Description of Type Design Change)

1) The installer must determine whether this design change is compatible with previously approved Modifications.

(See Continuation sheet 3 of 3 for complete list of Limitations and Conditions) February 1, 2023 September 9, 2024 Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Services 3 FOR:

SA04677CH

SA04677CH Date of Issuance: September 9, 2024

Description of Type Design Change (Continued):

FAA Approved Airplane Flight Manual Supplement 6004-FMS, Revision 1, approved August 15, 2024, for the Hopper Packer System, or later FAA approved revision is required on board the modified aircraft.

2) If the STC holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.

3) FAA approved Instructions for Continued Airworthiness (ICA), Section 16, Airworthiness Limitations (AWL), document 6004-ICA, FAA approved on March 27, 2024, or later FAA approved revision is required for this modification.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the AML aircraft is as follows:

a. The type certification basis for the AML aircraft is shown on TCDS *see AML* for parts not changed or affected by the change.

b. This certification basis for parts changed or affected by the change since the reference date of application, February 1, 2023, is as follows:

Applicable regulations at the listed amendment level:

23.29(b)[23-21], 23.301[23-48], 23.303[23-0], 23.305[23-45], 23.307[23-0],

23.601[23-0], 23.603[23-0], 23.605(a)[23-23], 23.607[23-48], 23.609[23-0], 23.611[23-48],

23.625(a)[23-7], 23.777(a)[23-51], 23.853(a)[23-49], 23.867(b)(1)[23-46],

23.1191(a)(b)(c)(e)(g)(h)[23-51], 23.1301(a)(b)(c)(d)[23-20], 23.1309(a)(1)(2)[23-49],

23.1351(a)(1)(2)(i)(b)(1)[23-49], 23.1357(a)(b)(c)[23-43], 23.1359(c)[23-49],

23.1365(a)(b)(d)(e)[23-49], 23.1367(a)(b)(c)(d)[23-0], 23.1431(a)(b)[23-49], 23.1501(a)(b)[23-21],

23.1529[23-26], 23.1541(a)(2)(b)[23-21], 23.1581(a)(b)(c)(d)(f)[23-50], 23.1583(m)[23-50],

23.1585(j)[23-50] -----END----- 3 3