What it approves
Modifications to reduce airframe aerodynamic drag
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 3 of the Civil Air R egulations.
Original Product Type Certificate N umber :
Modifications to reduce airframe aerodynamic drag on Cessna 414A model aircraft in accordance with RAM Aircraft Corporation Master Drawing No. 1914, dated 03/26/1997, or later FAA approved revision. Modifications to reduce airframe aerodynamic drag on Cessna 414 model aircraft in accordance with RAM Aircraft Corporation Master Drawing No. 2005, Revision A, dated 07/16/1998, or later FAA approved revision.
Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certi ficate and the supporting data which is the basis for approval shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.
RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 A7CE M ake : Cessna M odel : 414; 414A Date of application : November 06, 1995
Date of issuance : July 16, 1997
Date reissued : October 8, 2001
Date amended : June 03, 1999 Revision 1
B y direction of the A dministrator
(Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.