Supplemental type certificate · S-TEC Corporation

Holder
S-TEC Corporation · United States
Status
Current · Issued
Status date
June 12, 2001
Applied
June 8, 2001
Product
Aircraft · Single-Engine
Certification basis
Part 21
Data sheet
TCDS3A21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of S-TEC System 20/30 single and two-axis automatic flight guidance systems, model ST-876-20/30.

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA09453 AC-D This certificate issued to: S-TEC Corporation One S-TEC Way Mineral Wells Municipal Airport Mineral Wells, TX 76067-9236 Part 3 of the Civil Air Regulations.

Original Product Type Certificate Number: 3A21 Make: Cessna Model: 210D, 210E, 210F, and T210F Description of Type Design Change:

Installation of S-TEC System 20/30 Single and Two Axis Automatic Flight Guidance Systems, Model ST-876-20/30, according to Bulletin No. 976, dated 6-07-01 and Master Drawing List No. 921186, dated 6-07-01 or later FAA Approved revisions of the above data (14 Volt System).

(See Continuation Sheet, Page 2, a part of this STC.)

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission •

Date of Application: 6-08-01 Late weissaed:

Date of Issuance: . 6-12-01 Date Amended:

By Direction of the Administrator FEDERAL AVIATION MilK (Signature) POMINSTRATCH Michael Keirnan DAS Staff Coordinator, DAS 5 SW (Title)

FAR Porm 8110-2 (10-68) Page 1 of

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA09453 AC-D Limitations and Conditions: (con't.)

Also eligible on the above models when modified per STC SA1525WE (Robertson STOL) or STC SA1048CE (Horton STOL).

FAA/DAS Approved Supplemental Flight Manual, P/N 892034, dated 6-12-01 is required for Cessna models 210D, 210E, 210F, and T210F and these models when modified per STC SA1525WE (Robertson STOL) or STC SA1048CE (Horton STOL) for S-TEC System 20 or later FAA Approved revisions of the above supplement, FAA/DAS Approved Supplemental Flight Manual, P/N 892035, dated 6-12-01 is required for Cessna models 210D, 210E, 210F, and T210F and these models when modified per STC SA1525WE (Robertson STOL) or STC SA1048CE (Horton STOL) for S-TEC System 30 or later FAA Approved revisions of the above supplement.

4. Compatibility of this modification with other previously approved modifications must be determined by the installer.

FAA Porm 8110-2 (10-68) Page 2 of 2

INSTRUCTIONS. The transfer endorsement below may be used to notify the appropriate FAA Pegional Office of the transfer of this Supplemental Type Certificate The FAA will reissue the certificate in the name of the transferee and forward it to him.

TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street ) (City, State, and ZIP code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, State, and ZIP code ).

Signature of grantor (In ink):

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 4

MakeModelData sheet
Cessna Aircraft Company210D3A21
Cessna Aircraft Company210E3A21
Cessna Aircraft Company210F3A21
Cessna Aircraft CompanyT210F3A21