Supplemental type certificate · S-TEC Corporation

Holder
S-TEC Corporation · United States
Status
Current · Issued
Status date
January 24, 2002
Applied
January 22, 2002
Product
Aircraft · Small Airplane
Certification basis
Part 11, Part 21
Data sheet
TCDS3A10

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of S-TEC System 20/30 Single and Two Axis Automatic Flight Guidance Systems, Model ST-896-20/30.

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA09519AC-D This certificate issued to: S-TEC Corporation One S-TEC Way Mineral Wells Municipal Airport Mineral Wells, TX 76067-9236 I art 3 of the Cir his Rogulations.

Original Product I ype Certificate A umber: ЗА10 Alike : Cessna Model: 310D, 310E (USAF U-3B), 310F, 310G, and 310H Description of Type Design Change:

Installation of S-TEC System 20/30 Single and Two Axis Automatic Flight Guidance Systems, Model ST-896-20/30, according to Bulletin No. 996, dated 1-21-02 and Master Drawing List No. 921212, dated 1-21-02 or later FAA Approved revisions of the above data (28 Volt System).

(See Continuation Sheet, Page 2, a part of this STC.)

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: 1-22-02 Date Reissued:

Date of Issuance: 1-24-02 Date Amended:

By Direction of the Administrator FEDERAL AVIATION sill k (Signature) TOMNISTRATIO Michael Keirnan DAS Staff Coordinator, DAS 5 SW (Title)

PAA Form 8110-2(10-68) Page 1 of 2

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA09519AC-D Limitations and Conditions: (con't.)

Also eligible on Cessna models 310G and 310H when modified per STC SA412S0 (300 H.P.

Colemill Conversion).

2. FAA/DAS Approved Pilot's Operating Handbook and/or Airplane Flight Manual Supplement, P/N 892110, dated 1-24-02 is required for Cessna models 310D, 310E (USAF U-3B), 310F, 310G, and 310H; and Cessna models 310G and 310H when modified per STC SA412S0 (300 H.P. Colemill Conversion) for S-TEC System 20 or later FAA Approved revisions of the above supplement.

FAA/DAS Approved Pilot's Operating Handbook and/or Airplane Flight Manual Supplement, P/N 892111, dated 1-24-02 is required for Cessna models 310D, 310E (USAF U-3B), 310F, 310G, and 310H; and Cessna models 310G and 310H when modified per STC SA412SO (300 H.P. Colemill Conversion) for S-TEC System 30 or later FAA Approved revisions of the above supplement.

4. Compatibility of this modification with other previously approved modifications must be determined by the installer.

FAA Form 9110-2-1(10-69) Page 2 of 2

TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee).

(Address of transferee) (Number and street) (City, Stale, and 2IP code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, State, and ZIP code) Extent of Authority (if licensing agreement): - Date of Transfer:

Signature of grantor (In ink):

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 4

MakeModelData sheet
Cessna Aircraft Company310D3A10
Cessna Aircraft Company310F3A10
Cessna Aircraft Company310G3A10
Cessna Aircraft Company310H3A10