What it approves
Installation of a wastegate in-line oil strainer
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 3 of the Civil Air R egulations.
Original Product Type Certificate N umber :
Installation of a wastegate in-line oil strainer according to RAM Drawing No. 1896, dated March 4, 1997 or later FAA approved revision.
Compatibility of this design change with previously approved modifications must be determined by the installer. Required placard P/N 1737-9 located on the screen housing P/N 9052V states the following: “RAM RECOMMENDS WASTEGATE IN-LINE OIL STRAINER SHOULD BE REPLACED AT EVERY OIL FILTER CHANGE. FAILURE TO DO SO MAY RESULT IN REDUCTION OF TURBO BOOST. USE REPLACEMENT STRAINER AND O- RING KIT P/N EK9052V”.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 3A25, A7CE M ake : Cessna M odel : 340; 340A; 402C; 414; 421B; 421C Date of application : March 13, 1997
Date of issuance : April 28, 1999
Date reissued : October 8, 2001
B y direction of the A dministrator
(Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
Number SA09544SC Date of Issuance: April 28, 1999
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.