What it approves
Installation of RAM Series VII 335 horsepower (hp) series, increase takeoff weight to 6,390 pounds, andincrease landing weight to 6,075 pounds.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SAO974SC.D This certificate issued to: RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 Part & of the Civil Air Pegulations.
Original Product Typo Certificato Number: 3A25 Cessna Model: 340; 340A Description of Type Design Change: Installation of RAM Series VII 335 horsepower engines, increase takeoff weight to 6,390 pounds, and increase landing weight to 6,075 pounds in accordance with RAM Master Drawing No.
2036, Revision B, dated August 25, 1999, or later FAA approved revision. FAA approved Airplane Flight Manual Supplement, AFMS 1095, dated September 21, 1999, or later FAA approved revision is required.
Limitations and Conditions: RAM vortex generator kit must be installed in accordance with STC SA7975SW-D, and electronic fuel flow gauge must be installed in accordance with STC SA5796SW-D. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that
Date of Application: June 01, 1999 Date Reissued: September 20, 2002; February 20, 2008;
September 11, 2008 Date of Issuance: February 29, 2000 Date Amended:
FEDERAL AVIATION By Direction of the Administrator
ORIGINAL SIGNED BY TERRY BOWDEN * (Signature) TOMINISTRATO DAS administrator Terry L. Bowden DAS-700100-SW RAM Aircraft LP Waco, Texas (Title) 4
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.