What it approves
Installation of RAM Induction Equalized Fuel Nozzle Set.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part * of the * R egulations.
Original Product Type Certificate N umber :
Installation of RAM Induction Equalized Fuel Nozzle Set in accordance with RAM Aircraft, Limited Partnership Master Drawing No. 2027, Revision A, dated April 12, 2000, or later FAA approved revision. FAA approved Airplane Flight Manual Supplement AFMS 1088, Revision I.R., dated September 15, 2000, or later FAA approved revision is required.
Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 [see attached FAA Approved Model List M ake : (AML) for list of approved models and M odel : applicable airworthiness regulations] Date of application : July 13, 1998
Date of issuance : September 15, 2000
Dat e reissued : 10/8/01; 9/20/02
B y direction of the A dministrator
(Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 18
| Make | Model | Data sheet |
|---|---|---|
| The Cessna Aircraft Company | 320D | 3A25 |
| The Cessna Aircraft Company | 320E | 3A25 |
| The Cessna Aircraft Company | 320F | 3A25 |