STC SA1007CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the

Signature

Title 2 SA1007CE Curry Aviation, LLC 616 N. Palmetto Street Leesburg, FL 34748 Civil Air Regulations.3 Installation of STOL Kit (full spar leading edge cuffs and drooped tips). Data required:

1. FAA Approved STOL-Craft Drawing List No. 4, dated April 9, 1974, or later FAA approved revision.

1. Compatibility of this design with previously approved modification must be determined by the installer.

2. Special agricultural loadings at weights above 3300 lbs. will have to be developed by the individual operator under procedures administered by the local FAA FSDO.

for Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service Textron Aviation (Cessna) 188, 188A, A188, A188A 5/26/1977, 12/16/2022February 4, 1974 April 5, 1974 A9CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

2 SA1007CE