STC SA1010CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the

Signature

Title 2 SA1010CE Curry Aviation, LLC 616 N. Palmetto Street Leesburg, FL 34748 Federal Aviation Regulations.23 Installation of wing leading edge cuffs. Data required:

1. FAA Approved STOL-Craft Drawing List No. 5, dated April 16, 1974, or later FAA approved revision.

Compatibility of this design with previously approved modification must be determined by the installer.

for Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service Grumman-American Aviation Corp.

AA-1 5/26/1977, 12/16/2022 8/21/84 December 26, 1973 April 16, 1974 A11EA

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

2 SA1010CE