What it approves
Installation of retractable aircraft recognition lights.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Part of the
Signature
Title SA1013CE Textron Aviation Inc.
One Cessna Boulevard Wichita, KS 67215 25 Federal Aviation Regulations.
Cessna 500 2 A22CE Installation of Retractable Aircraft Recognition lights. DATA REQUIRED:
1. Branson Engineering Company Drawing List No. 90004, April 13, 1974, or Revision A, September 7, 1977, and
2. Branson Engineering Airplane Flight Manual Supplement dated April 24, 1974, or later FAA approved revision to (1) or (2).
This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of these other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.
Except for aircraft Serial Number 500-0154, parts manufactured and installed under this STC must be approved and marked in accordance with the requirements of FAR 21.303 and FAR 45.15.
January 4, 1985; March 3, 1986;
September 1, 2017 July 26, 1978 March 28, 1974 April 24, 1974 Mark Fuller STC ODA administrator ODA-100129-CE
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Cessna Aircraft Company | 500 Series | A22CE |