What it approves
Installation of a Chelton Aviation Corp. AP-3C autopilot in accordance with Master Drawing List No. MS-006-12, Rev. F, dated February 3, 2004, or later FAA approved revision. FAA approved Airplane Flight Manual MS-006-14, Rev. I. R., dated February 5, 2004, or later FAA approved Revision is required.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Project No. ST7645SC-A GDM Number SA10221SC This Certificate issued to Chelton, Inc.
5011 Sabre Drive Denton, TX 76207
Part 23 of the Federal Aviation Regulations.
Original Product Type Certificate Number : A20CE Make : Cessna Model : 177RG
Description of Type Design Change: Installation of a Chelton Aviation Corp. AP-3C autopilot in accordance with Master Drawing List No. MS-006-12, Rev. F, dated February 3, 2004, or later FAA approved revision. FAA approved Airplane Flight Manual MS-006-14, Rev. I. R., dated February 5, 2004, or later FAA approved Revision is required.
Limitations and Conditions: Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : October 01, 2003
Date of issuance : February 05, 2004 Date reissued :
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Cessna Aircraft Company | 177RG | A20CE |