What it approves
Installation of the AVIA Hamilton Standard V508E propeller
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Project Number ST7400SC-A, PWH
Part 3 of the Civil Air Regulations.
Description of Type Design Change: Installation of the AVIA Hamilton Standard V508E propeller in accordance with “Installation Instructions of AVIA V508E Propeller”, Drawing No. CTC-03-002-1, Revision A, dated May 13, 2004. The FAA Approved Airplane Flight Manual Supplement, dated May 14, 2004, or later FAA Approved revision is required.
Limitations and Conditions: Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. Limited to airplanes with STC SA09857SC (Walter M601E-11 turboprop engine) and propeller electronic speed limiter unit. The propeller diameter is limited to 105 to 106 inches in diameter.
Canada Turbine Conversion Inc.
Lot 16 RM of Alexander 105081 Highway 11 Pine Falls, MB ROE1M0 Canada A-815 Make : Bombardier (Otter) Model : DHC-3 Date of application : December 6, 2002
Date of issuance : May 14, 2004
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Bombardier Inc. | DHC-3 | A-815 |