STC SA10240SC

Supplemental type certificate · Capital Aviation Inc

Holder
Capital Aviation Inc · United States
Status
Current · Issued
Status date
June 21, 2004
Applied
April 8, 2003
Product
Aircraft · Single-Engine
Certification basis
Part 21, Part 23
Data sheet
TCDSA37CE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Modification of aft bench set in accordance with Capital Aviation Master Drawing List, MDL-CA-3196, Revision C, Dated 04-30-2004, or later FAA approved revision; maintained per the Capital Aviation Cessna Model 208, 208B Aft Bench Seat(s) Instructions for Continued Airworthiness, Revision Original Issue, Dated 04-28-04, or later FAA accepted revision; and use of Capital Aviation Aircraft Flight Manual Supplement for Cessna Model 208 and Model 208B Aft Seat Installation, dated June 21, 2004, or later FAA approved revision is required.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA10240SC Project Number ST7478SC-A (JRR)

This Certificate issued to Capital Aviation, Inc.

5500 Phillip J. Rhoades Hangar 2, Wiley Post Airport Bethany, OK 73008

Part 23 of the Federal Aviation Regulations.

Original Product Type Certificate Number : A37CE Make : Cessna Model : 208; 208B

Description of Type Design Change: Modification of aft bench set in accordance with Capital Aviation Master Drawing List, MDL-CA-3196, Revision C, Dated 04-30-2004, or later FAA approved revision; maintained per the Capital Aviation Cessna Model 208, 208B Aft Bench Seat(s) Instructions for Continued Airworthiness, Revision Original Issue, Dated 04-28-04, or later FAA accepted revision; and use of Capital Aviation Aircraft Flight Manual Supplement for Cessna Model 208 and Model 208B Aft Seat Installation, dated June 21, 2004, or later FAA approved revision is required.

Limitations and Conditions: Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application : April 08, 2003

Date of issuance : June 21, 2004 Date reissued :

( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region

(Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
The Cessna Aircraft Company208A37CE
The Cessna Aircraft Company208BA37CE