STC SA10285SC

United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Project No. ST7892SC-A GDM

5011 Sabre Drive Denton, TX 76207

Part 23 of the Civil Air Regulations.

Original Product Type Certificate Number : 3A21 Make : Cessna Model : (See continuation sheet 3 of 3)

Description of Type Design Change: Installation of a Chelton Aviation Corp (CAC) AP-3C autopilot accordance with Master Drawing List No. MS-011-12, Rev. B, dated September 21, 2004 or later FAA approved revision. FAA approved Airplane Flight Manual Supplement MS-011-14, Rev. I. R., dated September 27, 2004, or later FAA approved revision is required.

Limitations and Conditions: Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application : June 30, 2004

Date of issuance : September 27, 2004 Date reissued :

( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region

(Title)

FAA Form 8110-2-1(10-69) Page 2 of 2

Number SA10285SC Date of Issuance: September 27, 2004

Model List for STC SA10285SC

210K, T210K, 210L, T210L, 210M, T210M, 210N, P210N, T210N, 210R, P210R, T210R

Certification Basis: Regulations at the latest amendments 23-0 through 23-55

23.143, 23.253, 23.301, 23.303, 23.305, 23.391, 23.395, 23.397, 23.561, 23.601, 23.603, 23.605, 23.607, 23.069,

23.611, 23.613, 23.671, 23.672, 23.677, 23.685, 23.689, 23.777, 23.779, 23.1301, 23.1307, 23.1309, 23.1321, 23.1322,

23.1329, 23.1351, 23.1357, 23.1381, 23.1431, 23.1529, 23.1555, 23.1581, 23.1583, 23.1585

----------------------------------------------------------------End-------------------------------------------------------------------------- ----