STC SA1029NW

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA1029NW This certificate issued to: WESTERN METAL PRODUCTS Part 25 ofthe Federal Aviation Regulalions. (See Type Certificate Data Sheet A16WE) Original Product - Type Certificate Number: A16WE Make: Boeing Model: 737-275C Description of Type Design Change:

Installation of cargo restraint equipment for the three or five forward cargo pallet positions in accordance with FAA sealed Vinnedge & Associates Drawing List No. 212.

Limitations and Conditions: The approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. The interior arrangement, along with the required placarding, and associated cargo compartment requirements have not been evaluated and rendered, suspended, veroked, or a termination date is therwise established by the Sidministrator of the Federal Aviation Administration Date of Application: JU1Y 1, 1980 Date Reissued: February 16, 1984 Date of Issuance: . September 27, 1980 Date Amended:

FEDERAL AVIATION Thome 1. Cuna Curra (Signature) TO MINISTRATE Manager, Seattle Aircrait Acting Certification Office, ANM-100S (Title)

47.