STC SA1042NW

Supplemental type certificate · R&K Aeromotive

Holder
R&K Aeromotive · United States
Status
Current · Issued
Status date
January 23, 1981
Applied
October 14, 1980
Product
Aircraft · Small Airplane
Certification basis
Part 21
Data sheet
TCDSA-799

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of a Continental engine and a McCauley propeller

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SA1042NW This certificate issued to: R & K Aeromotive, Inc.

Purt 3 of the CiVil Air Fregulations.

Criginal Induct - Type bertificate Number: A-799 Make: Cessna Model: 170B Description of Type Design Change: Installation of a Continental 0-300-D engine and icCauley 1C172/EM7651 propeller, with a Cessna 172F spinner in accordance wit R & K Aeromotive, Inc. photographs 1 through 3.

Limitations and Conditions: Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited to the installation in Cessna 170B, Serial Number 27069 only. A copy of this Certificate and Addendum No. SA1042NW shall be maintained as part of the permanent records for the modified aircraft.

SA1042NW The conditions and limitations of Type Certificate Data Sheet Number A-799 apply except where superseded by the following:

Supplemental Type Certificate Data Sheet, which is part of STC SA1042NW, prescribes the conditions and limitations under which the product for which the STC was issued meets the airworthiness requirements of the Civil Air Regulations.

Supplemental Type Certificate HOLDER: R & K Aeromotive, Inc.

CESSNA 170B (LANDPLANE - NORMAL CATEGORY) AS MODIFIED BY STC SA1042NW Engine: Continental 0-300-D Engine Limits: 145 Hp @ 2700 rpm Fuel: 80/87 aviation gasoline Propeller and McCauley 1C172/EM7651 Propeller Limits: 165 Hp @ 2800 rpm Diameter: 76" maximum; 68" minimum Pitch Setting: 76" maximum; 38" minimum Serial Number Eligible: 27069 only

- END -

FAA FORM B110-2-1 (10-69) PAGE 3 OF 3PAGES C FAA AC 73-2651

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
Cessna Aircraft Company170BA-799