STC SA1059EA

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SA1059EA Textron Aviation Inc.

One Cessna Boulevard Wichita, KS 67215 25 Federal Aviation Regulations.

Cessna 500 3 A22CE Installation of an Airways Calibration System in accordance with the data listed in Atlantic Aviation Corporation Drawing List No. AAC77-8, Revision No. 6 dated August 16, 1977.

1. The Airways Calibration System is approved for installation on a "No Hazard" basis. The system has been evaluated for electrical and structural integrity only and has been evaluated for function or accuracy with regard to monitoring ground navigation facilities.

(see continuation sheet 3 of 3) September 27, 1977; January 4, 1985;

March 3, 1986; April 27, 2017 March 14, 1977 August 29, 1977 Mark Fuller STC ODA administrator ODA-100129-CE

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

FAA Form 8110-2 (5/14) Page 3 of

Date of Issuance: August 29, 1977 Date Reissued: April 27, 2017

Limitations and Conditions (cont'd):

2. The FAA approved Atlantic Aviation Corporation Airplane Flight Manual Supplement No. 1 dated August 29, 1977, is required with this modification.

3. This approval should not be extended to other specific airplanes of this model on which other approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of the airplane.

-- END -- 3 SA1059EA