STC SA1064CE

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title Textron Aviation Inc.

One Cessna Boulevard Wichita, KS 67215 3 SA1064CE Civil Air Regulations.

4b Airplane Equipment Installation per FAA approved Beech Aircraft Corporation Drawing No. 125-001155 and FAA approved Airplane Flight Manual Supplement, Part No. 131320, dated November 1, 1974, required.

This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.

(see continuation sheet 3 of 3) Hawker Siddeley BH125-600A April 15, 1996; March 26, 2007;

December 12, 2016 September 12, 1974 November 1, 1974 A3EU Mark Fuller STC ODA administrator ODA-100129-CE

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

FAA Form 8110-2 (5/14) Page 3 of

Date of Issuance: November 1, 1974 Date Reissued: December 12, 2016

Parts manufactured under this STC may have been produced without an FAA approved quality control procedure. Prior to installation, such parts must be inspected for conformity and airworthiness in accordance with FARs 21 and 43. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

-- END -- SA1064CE 3