What it approves
Installation of Teledyne Continental Motors IOF-550-N engine.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Project No. ST7787SC-A JEP
Part 23 of the Federal Aviation Regulations.
Description of Type Design Change: Installation of Teledyne Continental Motors IOF-550-N engine in accordance with Drawing no. 17006-0000-1000-0000, Rev. B, dated 06/27/07, or later FAA approved revision. Type Design data is contained in Master Drawing List 17006-0000-0000-0000, Rev. C, dated 07/18/07 or later FAA approved version.
Required airplane flight manual data is contained in AFM supplement no. AFMS17006, dated July 20, 2007, or later FAA approved revision. Required instructions for continued airworthiness are contained in CenTex Aerospace, Inc.
maintenance/shop manual supplement no. 17006-06.
Limitations and Conditions: The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Certification Basis: 14 CFR Part 23 Amendment 23-55, Special Condition No. 23-212-SC, Special Condition No.
23-201-SC
CenTex Aerospace, Inc.
7925 Karl May Drive Waco, TX 76708-0500 A00009CH Make : Cirrus Design Corporation Model : SR22
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
Date of application : March 15, 2004
Date of issuance : July 24, 2007
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cirrus Design Corporation | SR22 | A00009CH |