STC SA1076NE

Supplemental type certificate · Equine Air Transport Systems LLC

Holder
Equine Air Transport Systems LLC · United States
Status
Current · Reissued
Status date
May 1, 2008
Applied
January 4, 1993
Product
Aircraft · Large Multi-Engine
Certification basis
Part 21, Part 25

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of Aerofex livestock carrier P/N TS-QA-400 platform and panel system using size A or size M Class II pallet.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA1076NE

Equine Air Transport Systems, LLC 868 102nd Avenue North Naples, Florida 34108 This Certificate issued to

Part * of the Federal Aviation Regulations. *

*(see attached FAA Approved Model List (AML)

*No. SA1076NE for list of approved airplane

*models and applicable airworthiness regulations.

Description of Type Design Change: Installation of: Aerofex Livestock Carrier P/N TS-QA-400 Platform and Panel System using size A or Size M Class II Pallet, in accordance with the Aerofex Livestock Transportation System Operational Manual No. AFX-TS- 3/4, dated June 26, 1992, or modifications in accordance with FAA Approved Aerofex Triple Stable Installation Drawing TSW-3000, Revision “A” dated July 15, 1999, or later FAA Approved Revisions, in accordance with Aerofex Triple Stable Operations Manual No. AFX-TSW-3000, Revision B dated September 28, 1999.

1) Aircraft must be configured as Cargo or Combi with a maximum floor load rated 1 excess of 105 pounds per square foot.

2) A “9g Barrier” net with rated capacity equal to or greater than the gross weight of the pallet and livestock must be installed.

(See STC Continuation Sheet, Page 3)

Date of application : January 4, 1993

Date of issuance : March 26, 1993 Date reissued : November 30, 1993, June 19, 2001, May 1, 2008

Date amended : October 4, 1999 By direction of the Administrator

( Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office

( Title)

Number SA1076NE

Limitations and Conditions: (Continued)

3) The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted airplane model series only. If the holder agrees to permit another person t use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

- END -

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 54

MakeModelData sheet
McDonnell Douglas CorporationDC-8-114A25
McDonnell Douglas CorporationDC-8-124A25
McDonnell Douglas CorporationDC-8-214A25
See all 54 models

Every issue · 1

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
May 1, 2008Reissued, currentCertificateApproved model list