What it approves
Installation of oxygen system.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Par t 4b/25 of the Civil Air/Federal Aviation R egulations.
Original Product Type Certificate N umber:
M ake:
M odel:
A. For HS.125-700A: Installation of oxygen system in accordance with Innotech Aviation Limited Drawing List Mod. No.
B6060-2, Issue B, dated March 31, 1978.
B. For HS.125-600A: Installation of oxygen system in accordance with Innotech Aviation Limited Drawing List Mod. No.
B6060-2, Issue F, dated July 8, 1981.
1. The location of the cabin oxygen masks is predicated on their relationships with the seat locations as defined in Innotech Aviation Limited Drawings
a. For HS.125-700A: “Master Cabin Locations” Drawing No. 43-E-25-02.027, Issue B, April 24, 1978.
This c ertificate and the supporting data which is the basis for approval shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.
Bombardier Completion Center, Inc.
200 Cote Vertu West Dorval, Quebec H4S 2A3 Canada
A3EU Hawker Beechcraft Corporation HS.125-700A and HS.125-600A or BH.125-600A Date of application : March 14, 1978
Date of issuance : June 7, 1978
Date reis sued: July 26, 2000
Date amended : July 31, 1981
B y direction of the A dministrator
(Signature) Gaetano Sciortino Manager New York Aircraft Certification Office
(Title)
FAA Form 8110-2-1(10-69) Page 3 of 3
N umber SA1104EA Date Reissued: July 26, 2000
b. For BH.125-600A or HS.125-600A: “Master Cabin Locations Ceiling Plan and RHS and LHS Elev.”, Issue C, dated June 6, 1981.
2. For BH.125-600A or HS.125-600A: Innotech Aviation Limited “Airplane Flight Manual Supplement No. 4 For Beechcraft- Hawker Model BH.125-600A Airplane with Passenger Oxygen System”, FAA approved July 31, 1981, is required with this installation.
3. The installer must determine whether this design change is compatible with previously approved modifications.
4. If the holder agrees to permit another person to use this certification to alter a product, the holder must give the other pe rson written evidence of that permission.
----END----
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.