What it approves
Installation of a cabin heat boost pump fan
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA1112NW
This certificate, issued to Machen, Inc.
10555 Airport Drive Coeur d'Alene Airport Hayden Lake, ID 83835
Part 3 of the Civil Air Regulations.
Original ProductType Certificate Number: 3A15 Make: Beech Model: 36 and A36
Description of the Type Design Change: Installation of a cabin heat boost pump fan, in accordance with Machen, Inc., Drawing No. 80-10001 and Installation Instruction Report No. 80-1.
Limitations and Conditions: Approval of this change in type design applies to the above model aircraft only.
This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate must be maintained as part of the permanent records for the modified aircraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Date of application: August 8, 1980 Date reissued: November 27, 2001 Date of issuance: December 4, 1980 Date amended: 10/25/01
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.