What it approves
Installation of side facing seats.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA1131SW This certificate issued to Aviation Fabricators 805 North Fourth Street Clinton, MO 64735
Part 3 of the Civil Air Regulations.
Original Product--Type Certificate Number : A7CE Make : Cessna Model : 401, 402, 411, 414, 421, 425 (all series)
Description of Type Design Change: Installation of side facing seats in accordance with Drawing list AF-170 dated March 8, 1994, FAA approved March 28, 1994 or later FAA approved revision.
1. Compatibility of this design change with previously approved modifications must be determined by the installer.
2. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
3. This STC approves only the installation of the parts contained in the above section “Description of Type Design Change.” The requirements for the aisle width, passenger oxygen system, seats and safety belts, and upholstery coverings will require a separate FAA approval to verify compatibility with installation of this STC.
Date of application : February 17, 1970
Date of issuance : March 20, 1970
Date amended : 7/30/79 Rev 1, 3/28/94, 6/15/04
Original signed by Joel M. Ligon
( Signature) Joel M. Ligon Program Manager Wichita Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.