STC SA1176SO

Part 3 of the Civil Air Regulations.)

Installation of Aileron and Wing Flap Gap Seals in accordance with D’Shannon Products Drawing B6300, Revision A, dated October 8, 1980, or later FAA approved revision.

1) Compatibility of this design change with previously approved modifications must be determined by the installer.

2) This approval should not be extended to other specific airplanes of this model on which previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any other of those previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.

3) If the holder agrees to permit another person to use this certificate to alter a product, the holder shall give the other person written evidence of that permission.

D’Shannon Products Ltd.

1309 County Road 134 Buffalo, MN 55313

A-777 and 3A15 Make : Hawker Beechcraft Corporation Model : See Continuation Sheet Date of application : August 1, 1980

Date of issuance : October 10, 1980 Date reissued : June 4, 2009; July 7, 2009

Date amended : January 6, 2010

Original Signed By:

Mary Ellen A. Schutt ( Signature) Mary Ellen A. Schutt Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office

( Title)

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA1176SO Date of Issuance: October 10, 1980 Date Amended: January 6, 2010

-----END----- Eligible Models

Type Certificate

Models

A-777

35 A35 B35 C35 35R D35 E35 F35 G35

3A15

H35 J35 K35 M35 35-33 N35 35-A33 35-B33 P-35 S35 35-C33 E33 F33 V35 V35A V35B 35-C33A E33A 36 A36 F33A G33 A36TC G36