STC SA1180GL

Part * of the *Regulations

Installation of main and nose gear fairings in accordance with F.R.A. Enterprises, Inc. DBA Skyport Services Installation Instructions as listed on AML No. SA1180GL, reissued June 10, 2016, or later FAA Approved revisions.

1. Installation is approved only on aircraft Serial Numbers 813 and up.

2. Nose Gear Wheel Fairing installation is eligible only on aircraft which have Nose Gear Fork Assemblies per: Erco Drawing No.

415-34096; Forney Drawing Nos. F34371 or F34381; or Mooney Drawing No. 530052.

3. Main Gear Wheel Fairing installation is eligible only on aircraft which have Main Landing Gear Assemblies per: Erco Drawing No. 415-33201; Forney Drawing No. F33201; or Mooney Drawing No. 520012.

4. The installer must determine whether this design change is compatible with previously approved modifications.

5. A copy of this Certificate and FAA Approved Model List (AML) No. SA1180GL, reissued June 10, 2016, or later FAA approved revisions, must be maintained as part of the permanent records for the modified aircraft.

6. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Alpha Aviation, Inc.

1500 E Main St Owatonna, MN 55060 * (see attached FAA Approved Model Make :* List (AML) No. SA1180GL for list of Model :* Approved models and applicable airworthiness regulations) Date of application : March 2, 1987

Date of issuance : May 15, 1987

Date reissued :February 18, 2003; September 8, 2005;

June 26, 2009; June 10, 2016 Date amended : September 6, 2001

(Signature) Karol Mordasiewicz Manager, Airframe & Administrative Branch Chicago Aircraft Certification Office

(Title)

Original signed by:

Gregory J. Michalik

FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES

Number