What it approves
Manufacturing and Installation of the Camera Mount
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
1211 Gravenhurst Parkway Gravenhurst, Ontario Canada P1P 1R1 Part 23 Title 14, Code of Federal Regulations A37CE Textron Aviation Inc.
208, 208B
1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. This STC is applicable to all serial numbers for these Make-Models.
(See continuation sheet 3) 02/26/2025 02/28/2025 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3
1. Manufacturing and Installation of the Camera Mount must be in accordance with ICARUS Aero Inc. drawing IC2023-440-000, Rev. NC, dated January 21, 2025, or later Transport Canada Civil Aviation (TCCA) approved revisions.
2. Maintenance must be in accordance with ICARUS Aero Inc. Instructions for Continued Airworthiness ICA-2023-440, Rev. NC, dated February 5, 2025, or later TCCA accepted revisions.
3. Operation must be in accordance with ICARUS Aero Inc. Flight Manual Supplement FMS-2023-440, Rev. NC, dated February 5, 2025, or later TCCA approved revisions.
4. Operation must be in accordance with the limitations section of the Flight Manual Supplement referenced in the Description of Type Design Change section.
5. OEM external belly-mounted cargo pod must be installed as a prerequisite prior to or concurrent with this STC.
----------END---------- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.