What it approves
Replacement landing gear components per Flanagan Aircraft Co. Drawing No. 1-9.01, stamped "FAA Approved," with a date of July 7, 1976, or later Federal Aviation Administration (FAA) approved revision.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA1244CE
This certificate, issued to Cub Crafters, Inc.
1918 South 16th Avenue Yakima, WA 98903-1212
Part 3 of the Civil Air Regulations.
Original ProductType Certificate Number: 1A2 Make: Piper Model: PA-18 and PA-18A
Description of the Type Design Change: Replacement landing gear components per Flanagan Aircraft Co.
Drawing No. 1-9.01, stamped "FAA Approved," with a date of July 7, 1976, or later Federal Aviation Administration (FAA) approved revision.
Limitations and Conditions: This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the inter-relationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. Parts manufactured under this STC may have been produced without an FAA-approved quality control procedure. Prior to installation, such parts must be inspected for conformity and airworthiness in accordance with Federal Aviation Regulations 21 and 43.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: February 14, 1976 Date reissued: January 15, 1997; January 26, 2012 Date of issuance: July 7, 1976 Date amended:
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.