What it approves
Installation of a shoulder restraint system for the entrance compartment jumpseat
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Par t 4b/25 of the Civil Air/Federal Aviation R egulation s.
Original Product Type Certificate N umber:
M ake:
M odel:
Installation of a shoulder restraint system for the entrance compartment jumpseat in accordance with Innotech Aviation Limite d Master Modification List No. ML43.2510.014, Issue D, dated July 16, 1981.
1. Jumpseat installation in accordance with STC SA327EA must be installed prior to or concurrent with this modification.
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
This certificate a nd the supporting data which is the basis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the A dministrator of the F ederal A viation A dministration.
Bombardier Completion Center Inc.
200 Cote Vertu West Dorval, Quebec H4S 2A3 Canada
A3EU Hawker Beechcraft Corporation BH.125-600A and HS.125-600A Date of application : June 23, 1981
Date of issuance : July 31, 1981
Date reis sued: June 26, 2000
B y direction of the A dministrator
(Signature) Gaetano Sciortino Manager New York Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.