What it approves
Installation of the MT-Propeller Entwicklung GmbH MTV-15-B/203-58 propeller
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
IMPORT SA12472IB MT-Propeller Entwicklung GmbH Flugplatzstrasse 1 94348 Atting Germany Part 23 Title 14 Code of Federal Regulations 3A23 Maule Aerospace Technology, Inc.
MX-7-180, MX-7-180A, MX-7-180B, MX-7-180C, MXT-7-180, MXT-7-180A This Supplemental Type Certificate is applicable to all serial numbers for these Make-Models.
(See Continuation Sheet 3) 06/24/2022 09/17/2026 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 4
1. Installation of the MT-Propeller Entwicklung GmbH MTV-15-B/203-58 propeller on the Maule Aerospace Technology, Inc. MX-7-180, MX-7-180A, MX-7-180B, MX-7-180C, MXT-7-180, and MXT-7-180A aircraft must be in accordance with the MT-Propeller Entwicklung GmbH Master Document List, Doc. # E-1779, Revision 2, dated March 18, 2025, or later European Union Aviation Safety Agency (EASA) accepted revisions, and the MT-Propeller Entwicklung GmbH Installation Instructions, Doc. # E-1781, Original Issue, dated September 9, 2009, or later EASA accepted revisions.
Description of Type Design Change (continued):
2. Maintenance must be in accordance with the MT-Propeller Entwicklung GmbH Instructions for Continued Airworthiness, Doc. # E-1782, Original Issue, dated September 9, 2009, or later EASA accepted revisions.
3. Operations must be in accordance with the MT-Propeller Entwicklung GmbH Supplement Airplane Flight Manual, Doc. # E-1780, Revision 2, dated March 18, 2025, or later EASA approved revisions.
2. The aircraft must be operated in accordance with the Limitations section of the Supplement Airplane Flight Manual referenced in the Description section.
3. The installer must determine whether this design change is compatible with previously approved modifications.
4. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.
Certification Basis:
Based on Title 14 Code of Federal Regulations (CFR) 21.115 and 21.101, and the Federal Aviation Administration (FAA) policy for design changes that are identified as not significant in FAA Order 8110.48, the type certification basis for the modified Maule Aerospace Technology, Inc. MX-7-180, MX-7-180A, MX-7-180B, MX-7-180C, MXT-7-180, and MXT-7-180A is as follows:
a. The type certification basis for the Maule Aerospace Technology, Inc. MX-7-180, MX-7-180A, MX-7-180B, MX-7-180C, MXT-7-180, and MXT-7-180A is as shown on Type Certification Data Sheet (TCDS) 3A23 for parts not changed or not affected by the change.
Certification Basis (continued):
b. The type certification basis for the Maule Aerospace Technolgy, Inc. MX-7-180, MX-7-180A, MX-7-180B, MX-7-180C, MXT-7-180, and MXT-7-180A for parts changed or affected by the change is as shown on TCDS 3A23 with the following exceptions:
• 14 CFR Part 36 at Amendment 36-32.
----------END---------- 4 4 Add Page
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.