STC SA12520IB

Supplemental type certificate · Lanitz-Prena Folien Factory GmbH

Holder
Lanitz-Prena Folien Factory GmbH · Germany
Status
Current · Issued
Applied
May 13, 2026
Product
Aircraft · Small Airplane
Certification basis
Part 23
Foreign approvals
EASA STC 10071055 Rev 4 dated 02/09/2026

From FAA DRS, with our copy of the certificate PDF. DRS record last changed October 9, 2026.

What it approves

Installation and maintenace of the Lanitz-Prena Folien Factory GmbH ORATEX covering and coating system installed without stitching

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

IMPORT SA12520IB Lanitz-Prena Folien Factory GmbH Am Ritterschloesschen 20 04179 Leipzig Germany Part 23 Title 14 Code of Federal Regulations *See attached FAA Approved Model List (AML) SA12520IB *See attached FAA AML SA12520IB *See attached FAA AML SA12520IB

1. This Supplemental Type Certificate is applicable to all serial numbers for the Make-Models shown on the attached FAA AML No. SA12520IB.

(See Continuation Sheet 3) 05/13/2026 10/07/2026 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 4

1. Installation and maintenace of the Lanitz-Prena Folien Factory GmbH ORATEX covering and coating system installed without stitching, must be done in accordance with the Lanitz-Prena Folien Factory GmbH Master Document Lists (MDLs), and the Application Manual & Airplane Maintenance Manual Supplements (AMMSs) shown on the attached Federal Aviation Administration (FAA) Approved Model List (AML) No. SA12520IB, or later European Union Aviation Safety Agency (EASA) accepted revisions of these documents.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. Maintenance must be done in accordance with the Airworthiness Limitations sections of the Application Manual & Airplane Maintenance Manual Supplements (AMMSs) shown on the attached FAA AML No. SA12520IB.

Certification Basis:

Based on Title 14 Code of Federal Regulations (CFR) 21.115 and 21.101, and the Federal Aviation Administration (FAA) policy for design changes that are identified as not significant in FAA Order 8110.48, the type certification basis for the modification on the applicable aircraft models is as shown on Type Certification Data Sheets (TCDSs) 2A8, 3A23, and A22NM plus the following regulations:

Regulation Amendment § 23.1 Amd 23-34 § 23.3 Amd 23-62 § 23.21 Initial Amendment § 23.29 Amd 23-21 § 23.45 Amd 23-62 § 23.63 Amd 23-62 § 23.143 Amd 23-50 § 23.201 Amd 23-62 § 23.203 Amd 23-62

Certification Basis (continued):

Regulation Amendment § 23.207 Amd 23-50 § 23.251 Amd 23-62 § 23.301 Amd 23-48 § 23.303 Initial Amendment § 23.305 Amd 23-45 § 23.307 Initial Amendment § 23.333 Amd 23-34 § 23.575 Amd 23-48 § 23.601 Initial Amendment § 23.603 Amd 23-23 § 23.605 Amd 23-23 § 23.609 Initial Amendment § 23.611 Amd 23-48 § 23.613 Amd 23-45 § 23.629 Amd 23-62 § 23.1193 Amd 23-62 § 23.1501 Amd 23-21 § 23.1529 Amd 23-26 § 23.1581 Amd 23-50

----------END---------- 4 4 Add Page

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 31

MakeModelData sheet
Aviat Aircraft Inc.A-1A22NM
Aviat Aircraft Inc.A-1AA22NM
Aviat Aircraft Inc.A-1BA22NM
See all 31 models

Every issue · 1

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
—Issued, currentCertificateApproved model list