What it approves
Installation of Brittain Model ACS-1 Stability Augmentation system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA1300WE
This certificate issued to: Brittain Industries, Inc.
3266 N. Sheridan Road Tulsa, OK 74115
Part 3of the Civil Air Regulations.
Original Product – Type Certificate Number: 3A18
Make: Aero Commander (Meyers) Model: 200 Series
Installation of Brittain Model ACS-1 Stability Augmentation system in accordance with Brittain Installation Instructions No. 11988.
Applicable eligible aircraft models and applicable FAA Approved Airplane Flight Manual(s)/Supplement(s) required with this installation are listed on Sealed Master Drawing List #SA-88 or later FAA approved revision. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Date of application: October 10, 1966 Date reissued: November 19, 2013;
08/14/67; 11/10/69; 11/2/72 Revision 3 Date of issuance: October 31, 1966 Date amended:
Signature S. Frances Cox
Title Manager, Special Certification Office, Southwest Region
FAA Form 8110-2 (8/13) Page 1
SUPPLEMENTAL TYPE CERTIFICATE, FAA FORM 8110-2 (CONTINUED)
To (Name of transferee)
(Address of transferee)
(Number and street)
(City, State, and ZIP Code)
From (Name of grantor)
(Address of grantor)
(Number and street)
(City, State, and ZIP Code)
FAA Form 8110-2 (8/13) Page 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.