STC SA1328CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the

Signature

Title 2 SA1328CE Curry Aviation, LLC 616 N. Palmetto Street Leesburg, FL 34748 Civil Air Regulations.3 Installation of STOL Kit (wing leading edge cuffs, droop tips, and stall fences). Data required:

1. FAA Approved STOL-Craft Drawing List No. 7, dated May 19, 1977, or later FAA approved revision, and

2. FAA Approved Airplane Flight Manual Supplement (AFMS), dated September 30, 1982, or later FAA approved revision.

1. Compatibility of this design with previously approved modification must be determined by the installer.

2. AFMS dated September 30, 1982, is required for S/N 20700483 and on, when modification is installed.

for Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service Textron Aviation (Cessna) 207, 207A, T207, T207A 12/16/2022 9/30/82 May 5, 1977 May 19, 1977 A16CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

2 SA1328CE