What it approves
Installation of elevator tail cone fairings per Smith Speed Conversions Drawing List No. 1001 stamped FAA Approved on May 17, 1978, or later.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to
Part 3 of the Civil Air Regulations.
Description of Type Design Change: Installation of elevator tail cone fairings per Smith Speed Conversions Drawing List No. 1001 stamped “FAA Approved” on May 17, 1978, or later.
Limitations and Conditions: 1. This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. 2. Approval of this STC does not constitute authority to produce parts for sale. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
D’Shannon Products, Ltd.
1309 County Road 134 Buffalo, MN 55313
3A15 Make : Beech Model : S35; V35; V35A; V35B Date of application : April 21, 1978
Date of issuance : May 17, 1978
Date reissued : January 26, 1993; October 12, 1982;
September 28, 2011
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.