STC SA1433WE

FAA Form 8110-2 (5/14) Page 1 of 2

Number: SA1433WE

Part 23 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: 3A19 Make: Cessna Model: 150G, 150H, 150J, 150K

Installation of Brittain Industries Model CSA-1 Stability Augmentation System in accordance with Brittain Industries Master Drawing List No. 3-502-02, Revision B dated 12/20/72 or later FAA approved revision.

FAA Approved Airplane Flight Manual dated June 15, 1967, Revision “A” dated March 27, 2973, or later FAA approved revision, is required.

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Date of Application: May 5, 1967 Date Reissued: October 17, 2013; October 21, 2016;

11/10/69; 10/20/72; 3/27/73 Revision 3 Date of Issuance: June 15, 1967 Date Amended:

Signature

Title James A. Grigg Acting Manager, Fort Worth Aircraft Certification Office, Southwest Region Brittain Industries, Inc.

3266 N. Sheridan Road Tulsa, OK 74115

FAA Form 8110-2 (5/14) Page 2 of 2

Transfer the ownership of Supplemental Type Certificate Number: SA1433WE

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST10962SC

FAA Form 8110-2 (5/14) Page 3 of 3