What it approves
Installation of Piper landing gear vee assemblies, P/Ns 10033-5, 10033-6 with P/Ns J-10033-( ).
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA1526NM This certificate issued to: Delbert Dean Huss Jr.
Part 3 of the Civil Air Regulations.
Original Product -Type Certificate Number: 1A2 Make: Piper Model: PA-18 Series Description of Type Design Change:
Installation of Piper landing gear vee assemblies, P/N's 10033-5, 10033-6 with P/N's J-10033-0 in accordance with Jensen Aircraft Master Drawing List J10000, dated October 21, 1983, FAA approved November 2, 1983 or later FAA approved revision.
This approval should not be extended to airplanes of these models on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that airplane.
Date of Application: March 29, 1982 Date Reissued: 2/29/88, 4/14/89, 7/14/97, January 29, 1999 Date of Issuance: November 12, 1982 Date Amended: 4/19/83, November 2, 1983 FEDERAL AVIATIO By Direction of the Administrator Ronald F. May (Signature) Manager *OMINIST RATIO Northwest Mountain Region Denver Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 16
| Make | Model | Data sheet |
|---|---|---|
| Piper Aircraft Inc. | PA-18 | 1A2 |
| Piper Aircraft Inc. | PA-18-105 (Special) | 1A2 |
| Piper Aircraft Inc. | PA-18-125 (Army L-21A) | 1A2 |