What it approves
Installation of Global GNS-500 Series 3C VLF/Omega Navigation System utilizing software program 3C-FE9F/E
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
SA1530SO Ontic Engineering and Manufacturing, Inc.
1176 Telecom Drive Creedmoor, NC 27522 Part 3 the Civil Air Regulations A5SW Fairchild/Swearingen SA227-AT, (Merlin) Installation of Global GNS 500 Series 3C VLF/Omega Navigation System utilizing Software Program 3C-FE9F/E installed in accordance with appropriate drawings as listed in Master Drawing List, Report No.
DC83V001, Revision K, dated November 7, 1983, or later FAA approved Revision.
(See continuation sheet 3 of 3) August 29, 1983 December 16, 1983 S. Frances Cox Acting Manager, Fort Worth ACO Branch, Compliance & Airworthiness Division Aircraft Certification Service 3 March 15, 2022; August 23, 2002; June 6, 2003;
April 26, 2012; March 17, 2022
SA1530SO 3
SA1530SO Date of Issuance: December 16, 1983 Date of Reissuance: December 17, 2021
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission. FAA Approved Airplane Flight Manual Supplement dated December 16, 1983, is a required part of this STC. FAR 43 is adequate to insure Continued Airworthiness of this modification.
- END- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| M7 Aerospace LLC | SA227-AT | A5SW |