STC SA1568NM

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA1568NM This certificate issued to: Delbert Dean Huss Jr.

Part 3 of the Civil Air Regulations.

Original Product -Type Certificate Number: 1A2 Make: Piper Model: PA-18 Series Description of Type Design Change:

Installation of Cleveland wheels & brakes in accordance with Jensen Aircraft Master Drawing List No. J1000, dated October 21, 1983, or later FAA approved revision.

1. This STC is only valid when landing gear assembly (J10033) called in STC SA1526NM has been installed.

2. The maximum tire size is limited to 8.50 x 6.

3. This approval should not be extended to airplanes of these models on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that airplane.

Date of Application: March 29, 1982 Date Reissued: 2/29/88, 4/14/89, 7/14/97, January 29, 1999 Date of Issuance: November 1, 1983 Date Amended:

FEDERAL AVIATION By Direction of the Administrator Ronald F. May (Signature) Manager TOMINIST RATION Northwest Mountain Region Denver Aircraft Certification Office (Title)