STC SA1570CE-D

Supplemental type certificate · Honeywell International Inc

Holder
Honeywell International Inc · United States
Status
Current · Reissued
Status date
March 18, 2020
Applied
July 1, 1982
Product
Aircraft · Small Airplane
Certification basis
Part 3, Part 21
Data sheet
TCDS3A12

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of KAP 100 single axis, KAP 150 two axis, or KFC 150 two axis flight control system.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of 3 Number: SA1570CE-D This certificate issued to: Honeywell International Inc.

21111 N 19th Ave Phoenix, Arizona 85027 Part 3 of the Civil Air Regulations.

Original Product – Type Certificate Number: Make: Cessna 3A12 Model: 172N, 172P and 172Q Description of Type Design Change:

Installation of KAP 100 single axis, KAP 150 two axis, or KFC 150 two axis Flight Control System.

This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: 7-1-82 Date Reissued: 2-28-95; 2-28-00; 3-18-20 Date of Issuance: 9-17-82 Date Amended: 11-19-90 By Direction of the Administrator Signature Richard B. Sleigh Title ODA Administrator, ODA-602216-NM

FAA Form 8110-2 (5/14) Page 2 of 3

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA1570CE-D

FAA Form 8110-2 (5/14) Page 3 of 3 Description of Type Design Change: (continued) REQUIRED DATA:

KAP 100 Single Axis Flight Control System I. Master Drawing List 155-9255-00, Rev. 3, dated 10-22-90.

2. Airplane Flight Manual Supplement 006-0412-00, Rev. 1, dated 11-19-90.

KAP 150 and KFC 150 Two Axis Flight Control System I. Master Drawing List 155-9255-00, Rev. 3, dated 10-22-90.

2. Airplane Flight Manual Supplement 006-0412-01, Rev. 1, dated 11-19-90.

Later FAA approved revisions to above listed data are incorporated without further revision to the Supplemental Type Certificate.

---------------------------------------------------------------------------END--------------------------------------------------------------------------

ADs that name this STC · 1

An AD can apply because an STC is installed, or mention one in its text.

Approved models · 3

MakeModelData sheet
Textron Aviation Inc.172N3A12
Textron Aviation Inc.172P3A12
Textron Aviation Inc.172Q3A12

Every issue · 2

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
March 18, 2020Reissued, currentCertificate
February 28, 2000Reissued, earlier issueCertificate